Hi guys-I need to purchase another wideband for when I'm tuning other peoples cars. The LC-1 seems to be the best bang for the buck but it seems there are so many issues with it. The MPVI pro already has a custom PID setup for it so how hard could it be to hookup? Are there any issues with the MPVI pro or is staright forward and plug and play? Thanks!
GO RAIDERS!!!!!!!!!!
02 C5 Z06
8.8@160
I wouldn't use the terminology "plug and play", but it is fairly easy as long as you are somewhat familiar with wiring and grounding. All you have to do is check the sticky in here about how to set up the LC-1 and EIO with a voltage offset...that'll lay it out for you.
I've had no issues with mine with my serial interface, and none now with my new MPVI Pro. The LC-1 has been in for a year now, and still on the stock sensor running full time in my driver's side header bung (I run full time, open loop SD, so that spot is open). I do have it installed in an HBX-1 heat sink, and it helps to keep the heat down.
Reply With Quote