Results 1 to 1 of 1

Thread: Synching issues

  1. #1
    Potential Tuner
    Join Date
    Jan 2018
    Posts
    2

    Synching issues

    This post is no longer valid.
    Exact synching from a specific point onward may be the hardest part, but I've figured it out with some trial and error.

    Hello everyone.

    I just purchased RaceRender Ultimate 3.6.4 and just did a test drive using TrackAddict connected to a GoPro Hero5 Session and PLX Kiwi 3. I've imported the video file, as well as the CSV file into RaceRender.

    The project is about 15 min. long and I'd like to create a video with OBD data overlay from 07:35:00 to 08:35:00. I've just tried about everything but it never synchronizes correctly. I tried trimming, adjusting start time and end time (in the video and CSV file) and don't know what I'm doing wrong. I've also read the online manual, but it doesn't explain how to create a section, with OBD overlay, of a longer project.

    Can anyone point me in the right direction?

    Thank you all.
    Last edited by NVR NUF; 01-08-2018 at 09:07 AM.