Hey guys,
We got a 16 Camaro in the shop that has been giving us trouble. It is a mild pro charger build that should make 550-630 conservatively. We've done several of these and trucks already and not ran into the issue unless of course the setup was close on fueling like 650-700 rwhp. This car is only making 530ish on the dyno right now. It is done in speed density but have tried in the MAF also.
We've done a BAP and was still having a 20-30 psi drop in lift pump pressure. so we did a ZL1 intank pump. It's still missing the target but I would call it in the acceptable range at this point.
At this point we where seeing reasonable rear pump pressure but the front pump would command 2800-2900 psi make it to about 4800 RPM and fall to eventually 900 psi. So we put a new DI pump in it. No difference.
I'm starting to thing the ECM is not driving the DI pump like it should.. Maybe a bad driver in the ECM or the fuel pump lobe on the cam is bad.