Have someone with a map sensor locked and can not get a real boost log. Was seeing if any of you have a boost senor that is recommended for easy install that HPT will read. I am not close to the customer so trying to make it simple. He has a gauge but only loges through their software and would like my HPT logs to have boost incorporated.
What are you or they working with?
You didn't say what the application was so we can't really tell you what sensor to use. There are several 2 or 3 BAR MAP sensors you can purchase just depends on what kind of vehicle.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
Sorry didn't think it would matter. They are logging a 2014 srt jeep and using a innovate boost gauge. Innovate said no way to send output to HPT. I thought about just taking a voltage reading off the sender but innovate recommend not too. So just looking for a sensor that would work well with HPT scanner with easy math making it easy for the Jeep owner.
there are a bunch of AEM's and some others that are predefined transforms
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Could I just get a sensor and run 5volt though 2 amp fuse through sensor then to mpvi? Plus grounding. Using a aem sensor I could use your predefined numbers? That would make it so no need to change or add a complete gauge.
Shouldn't be an issue, thats kind of the route I plan to go on my mustang.Originally Posted by BLUEBOY455
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Thanks Bill for the help. Your team has been great to us BTW!
SRT4 style 2 bar works fine
Reply With Quote