Steven, I thought somehow i was going to find a PID in the scanner that will indicate the
mode, but looking at the tables, i see what you meant now
"Basically there's a pedal
mode received over CAN, and a table for both 4x4L/4x4H (normal vehicles will just use the 4x4H table) that states which of the "
mode" maps is actually used for given drive modes or not.
I have not figured out all the different modes as my personal car despite selection Normal/Sport/Track/Eco, they all mapped in the same internal
mode for pedal mapping, only the horsepower modes and such changed."
as i was expecting,
Sport for my car is
Mode # 2, thanks again for this clarification
torque_mode by
Wrangler RSM, on Flickr