Hy friends,
sorry for my bad english.
i have a question. how i can deaktivate the cylinder deaktivation in every drive mode .
grand cherokee srt8 building year 2015, 6.4 engine.
please write me an email if anybody can help me.
i pay for it. thanks
Hy friends,
sorry for my bad english.
i have a question. how i can deaktivate the cylinder deaktivation in every drive mode .
grand cherokee srt8 building year 2015, 6.4 engine.
please write me an email if anybody can help me.
i pay for it. thanks
Open the tune file and click Engine > Fuel > General. It should be right there is the top left hand corner. There is a master enable/disable switch there.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
i open it but i can?t find it,
maybe my english is to bad
if you have time you can write me an email.
maybe you can show me. thanks alot for fast reply
You likely aren't in the advanced view.
Click the EDIT tab at the top, then down the VIEW and click ADVANCED.
Then follow what I said and you'll see it. I can't write you an email, this is very straight forward.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
ok, i think i find it?
Multi-displacement system
but i am not shure which setting is right.
the factory set i see is :
MDS enable -disabled
vss min - 14 km/h
vss max - 66 km/h
(eco)vss min - 14 km/h
(eco)vss max - 72 km/h
wich setting is already the right one to deaktivate all time?
thanls a lot for the super fast reply and help.
Hy friends, anybody have a solution for me ?
i am not sure what i have to do with the settings.
the original setting see below
the factory set i see is :
MDS enable -disabled
vss min - 14 km/h
vss max - 66 km/h
(eco)vss min - 14 km/h
(eco)vss max - 72 km/h
just diabled MDS and thats it
Follow @MASTUNING visit www.mastuned.com
Remote Tuning [email protected]
Contact/Whatsapp +966555366161
Yep......Disable and Done!!!!!