what do i need to datalog to help me calibrate my MAF
what do i need to datalog to help me calibrate my MAF
you need your fuel trims and a wideband for pre-2011
Follow @MASTUNING visit www.mastuned.com
Remote Tuning [email protected]
Contact/Whatsapp +966555366161
yup i have all that. do i need to log stft and maf volts va rpm??
EQ Error vs MAF volts is the table you need to set up to dial in the MAF on a 2010 or older v8. Also you have to have HPT pro, the standard one does not have the pins to add the analog input from your wideband
Commanded AFR and Commanded Equivalence Ratio are the two different channels you can log. Both do the same things but with different values.
You can create an error against either but EQ (aka lambda) is better to use if you can.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.