I'm looking for stock MAF transfer curve data. My car came with a tune and we believe its tuned for an aftermarket intake but has the stock intake on it now. Trying to find some stock numbers and adjust from there. Thanks.
2011 SVTPP GT500
I'm looking for stock MAF transfer curve data. My car came with a tune and we believe its tuned for an aftermarket intake but has the stock intake on it now. Trying to find some stock numbers and adjust from there. Thanks.
2011 SVTPP GT500
Here's the tune from my stock 2010 GT500, should be the same as 2011.
Ok, I thought the period started in 2013, I haven't tuned my 2010 yet, so no experience with the way the fuel is tuned.
I appreciate the attempt and info. Anyone else? Thanks in advance.
2012 gt500 stock maf
Thanks! What does the VJK0 stand for?
So when comparing the curves, the curve for my car varies slightly from your second file. Ive compiled them in a file.
box code from ford, 4 digit code on pcm
Are you doing anything with the speed density tables on the GT500?
My 2014 I haven't figured out how to tune those yet, plus it has a table that I haven't seen in anything else, nobody knows anything about.
whats you strategy for the 2104 shelby gt500
either when you plug in the scanner and view vehicle information, or look at the PCM there shoud be 2 sets of number/letter combinations one id ford part number the other should be a 3/4/5digit number and letter combo like the 2012 pcm VJK0
See if these pics show the strategy
HPT info.jpg
HPT info2.jpg
FGFC3B5 is ARL5
well your strategy is FGFC3B5 and the 4 digit code should be ARL5 on the pcm, helps if you need to replace pcm, and and this is mainly how SCT catalogs the Vehicles if you ever use SCT
Ok, this is actually a different PCM from Ford, original one was/is locked by a tuner when I got the car, other tuner wanted $150 to return to stock, a new pcm was only $250, so I did that.
ANy input if I need to tune the speed density tables? Nobody seems to know anything about the speed density on GT500, only the Coyotes.
volumetric efficiency correction under boost
max MAP based on airflow
Maximum MAP
set MAX MAP Counts to 1020
set max load seen by engine 3