Results 1 to 3 of 3

Thread: Exhaust flames

  1. #1
    Tuner in Training
    Join Date
    Jul 2016
    Posts
    20

    Exhaust flames

    So ive been mucking around with these settings the last few nights, but have not been able to achieve any off throttle flames on sudden lift off.

    What i have tried is the following

    Disable all dfco settings

    Disable all torque management regarding tipout and dfco, number 7 and 16 i believe

    Increase lambda at 0% throttle above 3500rpm

    Retard timing above 3500rpm to -5, although this created a lot of bangs and pops, but no flames

    Tried enabling cat overtemp protection too to no avail

    Is there any other advice someone can lead me to try to get something? Il link a video of what im trying to get.



    Mods are gtx3582, all supporting mods on 98.

    https://youtu.be/JqLf_UzxJWU

    Thanks guys

  2. #2
    Senior Tuner SultanHassanMasTuning's Avatar
    Join Date
    Nov 2009
    Location
    All Around
    Posts
    3,149
    Try running a bit rich before rev limit and disable DFCO

    there is also cyl fuel off targets
    Follow @MASTUNING visit www.mastuned.com
    Remote Tuning [email protected]
    Contact/Whatsapp +966555366161

  3. #3
    Tuner in Training
    Join Date
    Jul 2016
    Posts
    20
    Where are the tables to adjust cylinder fuel off targets?