Results 1 to 14 of 14

Thread: 2014 Ford Coyote Stand alone harness

  1. #1
    Tuner in Training
    Join Date
    Mar 2018
    Posts
    16

    2014 Ford Coyote Stand alone harness

    Looking for a manufacturer, or a company that builds a stand alone wiring harness for a coyote engine. Preferable one with the ECM, Throttle pedal, MAF, etc. I know the one from Ford is out of stock looking to get one ASAP. Going in an off road race car.
    Thank you

  2. #2
    Tuner in Training JBMRACING0105's Avatar
    Join Date
    Oct 2017
    Location
    Mogadore, Ohio
    Posts
    20
    There is Power By The Hour but they are currently on back order right now as well.
    Thanks,
    John
    MARS Auto Parts & Engine Swaps
    866-321-6277 ext 103
    https://lsswap.parts/

  3. #3
    Tuner in Training
    Join Date
    Mar 2018
    Posts
    16
    so I guess its on to building my own?

  4. #4
    Advanced Tuner
    Join Date
    Feb 2012
    Location
    TEXAS
    Posts
    210
    Might be a viable suggestion, holley dominator has a Drive by wire Harness for its standalone ecu, the harness around $200

  5. #5
    Tuner in Training JBMRACING0105's Avatar
    Join Date
    Oct 2017
    Location
    Mogadore, Ohio
    Posts
    20
    We have attempted making 2 stand-alone harnesses with no luck as of yet. Still doing R & D but it seems to be more complicated than a LS stand-alone harness.
    Thanks,
    John
    MARS Auto Parts & Engine Swaps
    866-321-6277 ext 103
    https://lsswap.parts/

  6. #6
    Advanced Tuner
    Join Date
    Feb 2012
    Location
    TEXAS
    Posts
    210

    PIN outs

    I tired to attach the FRPP Control pack data sheet it has the pin outs you might need to complete your harness but the files to big to upload exceeds the max limits.

  7. #7
    Tuner in Training JBMRACING0105's Avatar
    Join Date
    Oct 2017
    Location
    Mogadore, Ohio
    Posts
    20
    Quote Originally Posted by mstang_man View Post
    I tired to attach the FRPP Control pack data sheet it has the pin outs you might need to complete your harness but the files to big to upload exceeds the max limits.
    Can you try emailing them to me?
    john@mars-atp.com

    Thanks a bunch
    Thanks,
    John
    MARS Auto Parts & Engine Swaps
    866-321-6277 ext 103
    https://lsswap.parts/

  8. #8
    Its a really simple harness to made.
    you just need to remove the unneeded wires, add a couple of relays and fuses.
    Have done a couple of 5.0L and gt500 harness.

    No need for the BCM or any other module.

    Thats how you wire the crank relay, is easy as that
    Attached Images Attached Images

  9. #9
    The way frpp setups the fuses and relays is more complex than it needs to be.

  10. #10
    Search out HextallS550 on Mustang 6g he is the man when it comes to custom harnesses.

  11. #11
    Tuner in Training
    Join Date
    Mar 2018
    Posts
    24
    Ron Francis has a standalone kit available as well.

  12. #12
    Tuner in Training
    Join Date
    Mar 2018
    Posts
    16
    Thanks for all the replies and the advise. How much different ar they frome A 5.8L harness that came out of a cobra?

  13. #13
    Did you remove pats system or how are you getting around that ?? . I made a bench harness/ standalone that i will use one day for a swap but i need to remove pats . i was able to pull the tune file from the PCM .

  14. #14
    Tuner in Training
    Join Date
    Sep 2017
    Location
    Toronto, Canada
    Posts
    20
    Quote Originally Posted by vw69turbobug562@gmail.com View Post
    Did you remove pats system or how are you getting around that ?? . I made a bench harness/ standalone that i will use one day for a swap but i need to remove pats . i was able to pull the tune file from the PCM .
    email eric books he can help with that