-
Tuner in Training
Relearn after 6L80e Rebuild?
Is the Fast Relearn all that I need to do after rebuilding a 6L80e? Vehicle is a 2012 Camaro SS, stock trans rebuild, stock converter and I'm unclear if I need to send it somewhere to reflash or if I can get away with just doing the Fast Relearn or another procedure in HP Tuners. Thanks in advance.
Matt
-
Advanced Tuner
do a clean, then do a fast learn.
-
Tuner in Training
Update: Can't get the Clean, and a Fast Relearn to Complete. Says "Temp Lo" when I try to complete either. Both are within range. Any Ideas?
28958271_10215945314691411_5434443727609266176_n.jpg
-
Tuner in Training
weird your trans temp is above 70c, i have seen others say even when its up to temp it wont work if you tried it before it was hot enough try again when it hits like 80c but dont attempt to learn until it hit that temp.
also here is guide https://forum.hptuners.com/showthrea...ght=fast+learn 96c might have been to high it says 70c - 95c
Last edited by Billycar11; 03-10-2018 at 11:41 PM.
-
Advanced Tuner
you can change the temp that it allows the clean to happen. atleast you can in efilive. i havent checked if hpt can do it.