Hello, this is my first time every buying new injectors for something I own. I Really want holley 66lb/hr but I see they are low impedance. Can I simply add 10ohm resistors to 1 wire of each injector?
Hello, this is my first time every buying new injectors for something I own. I Really want holley 66lb/hr but I see they are low impedance. Can I simply add 10ohm resistors to 1 wire of each injector?
Not worth the hassle.
The computer can not properly control low impedance injectors.
But injectors from ID, FIC or Deatchwerks that are known good injectors.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
no they have a different driving method than high impedance injectors so just throwing resistors at this wont work.
high impedance = saturated
low impedance = peak and hold (high amp opening and low amp sustained spray)
clip_image002_001.jpg
2000 Ford Mustang - Top Sportsman
thanks guys!. Wow so Holley doesn't sell anything to work in oem ecu after like 50lb!
Best cheap option is seimens deka 60's, 43.5 psi Ford blue Giants, or I would personally go to FIC 650's. IDs smallest is a 750 iirc, and may be a bit much if your already factoring the overhead properly for the 60 lb/he requirement you seek.
So how about these:
https://www.ebay.com/itm/Set-of-8-1-...4383.l4275.c10
With brand new ford injectors 50lb:
https://www.ebay.com/itm/2013-2014-F...72.m2749.l2648
Half the price of FIC
2004 Denali _M-9593-MU52.hpt
they work fine
2000 Ford Mustang - Top Sportsman
its the data for those injectors with non-referenced regulator units which was the common stock fuel rail application with 58 psi source.
2000 Ford Mustang - Top Sportsman
Hi....I'm using the injectors that were supplied with the Mass-Flo system that I had installed years ago. They are 36 lb/hr injectors, but no where in any documentation can I see if they are considered high or low impedance. I connected my Fluke 23 across the terminals on one of the injectors and it displays 17.4, where does that reading fall in the scale of high or low?
cheap pcb assembly
Last edited by BibbieMok; 04-24-2020 at 01:59 PM.