I just set up my scanner how schpenxel post it in the sticky, works great. Well I have a car here switch to e85 2001 camaro. Well since the file it?s 9.7 on the stoich airfuel, my ngk its reading 14.7 stoich so it?s throwing off my fuel error. What can I do or what I need??
Lambda.
Use lambda error or EQ Ratio Error as that's the other wording for it.
Disregard AFR with E85.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
Using that I will able to just copy and paste by % even my ngk its reading 14.7?
It doesn't matter what the gauge says so long as what you are logging in the scanner is lambda.
You should be able to choose the readout with most widebands, right click and choose lambda instead of AFR. If you can change the gauge to read in lambda too, that would be helpful.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
Ok, tomorrow morning I?ll give it a try.
Reply With Quote