So the normal math of "delivered torque x engine rpm / 5252 = HP" is not accurate with scaled injectors.
I have done the double stoic method and used the "cut and paste" injector dynamics tables for the ID1300x injectors. Is there a proper math formula to get the delivered torque to normal value to use it for HP calculations? I tried just dividing by 2 but the numbers still seem way too high.
EDIT: I had "engine torque" not "delivered engine torque" selected by accident, seems to register "normal" now BUT only up to 640lb/ft. I need to be able t log over 1000lb/ft, is it possible?