Hi folks! I was wondering if anyone could help me with this. My speedo gets to 160 and stays there on this one particular run only. Can someone have a look at my .csv file please? Thanks in advance.
Hi folks! I was wondering if anyone could help me with this. My speedo gets to 160 and stays there on this one particular run only. Can someone have a look at my .csv file please? Thanks in advance.
This is a limitation of OBD-II speeds... The value that is sent via the standard OBD-II speed PID is only 1 byte and it maxes out at 255 km/h, which is 158.45 MPH.
Fortunately, we can easily use your GPS speed instead: Double-click on your data file in RaceRender's "Input Files" list, then go down to the Vehicle Speed selection, and choose "Speed (MPH)". This is the GPS speed, and will override the OBD-II speed which is used by default.
Below that speed, it should work fine. Or, if there's no OBD-II speed data present, then RaceRender would use the GPS speed channel by default. As for TrackAddict, most of the analysis and displays there are setup for GPS speed and would be unaffected (although it does have a OBD speed user option for the video overlays).
Shameless plug from my run that day!
http://youtu.be/HtueMkPy3Y0