Results 1 to 9 of 9

Thread: cammed 17 silverado l83, surging idle and stalling

  1. #1
    Tuner in Training
    Join Date
    Oct 2014
    Location
    Alfred, Maine
    Posts
    19

    cammed 17 silverado l83, surging idle and stalling

    I have the Gen V Tuning school course, and I've made all the changes they suggested with minimal luck.. The truck is driveble but will stall if coasting to a stop or getting on the throttle and letting right out.

    Setup
    lt4 throttle body
    tsp vvt stage 3
    tsp long tubes
    cold air inductions CAI
    circle d 3200 triple disc
    my 2017 silverado 5.3 4-3-18 cam rev22.hpt
    18-04-07 14-45-43.hpl log with wot
    18-04-07 15-05-35.hpl idle log
    Last edited by ddedrick85; 04-08-2018 at 08:32 AM.

  2. #2
    Tuner in Training
    Join Date
    Oct 2014
    Location
    Alfred, Maine
    Posts
    19
    I can't figure out how to upload tune and logs...

  3. #3
    Senior Tuner SultanHassanMasTuning's Avatar
    Join Date
    Nov 2009
    Location
    All Around
    Posts
    3,149
    go to Go Advance you will see it
    Follow @MASTUNING visit www.mastuned.com
    Remote Tuning [email protected]
    Contact/Whatsapp +966555366161

  4. #4
    Tuner in Training
    Join Date
    Oct 2014
    Location
    Alfred, Maine
    Posts
    19
    Quote Originally Posted by SultanHassanMasTuning View Post
    go to Go Advance you will see it
    Got it Thanks!

  5. #5
    Potential Tuner
    Join Date
    Nov 2004
    Posts
    1
    ddedrick85, you figure this issue out. I have a very similar truck doing same thing.

  6. #6
    I have fixed this issue on my cam swaps. Pm me for info

  7. #7
    Potential Tuner
    Join Date
    Nov 2018
    Posts
    2

    Surging

    Did you ever get this fixed I have the same issue same exact mods thank you

  8. #8
    We keeping the fix to ourselves? Having same issues with a 15.
    2008 Corvette
    UPP Twin turbo T4 67mm BB billet wheel kit
    427 LME Billet Setup
    Fore Innovations Triple 465 L4 Setup
    FIC 2150 injectors
    RPM TH400/9 inch
    Pro Torque Bolt Together Converter
    MaxxECU Stand Alone

  9. #9
    I was able to get it to work using a different OS. I am still working to get it to work with the 5.3 os. Haven’t found any able to show how exactly to do this. Just hear it’s so complex only the poster knows how to do it. The tuning school documents don’t help to fix it either