Fusion Files Gps Splitted in 2 and not able to sync laptimes

[xxchris82xx]

Hello, I'm having issues stitching together the 2 gps data of the Fusion.
I have 14 minutes footage splitted in two (each one of 7 minutes), I group both videos and datas.
When I edit laps I have half laps with a splitted lap (In-Lap or PostRun).

It seems to me that the program can join the data, because the map and speed are correct, but not the lap times.

Did someone know how can I join them together?

Thanks,
Christian

[Weston@HPTuners]

You should be able to get lap timing and other features working with multi-part data files by merging them all into one combined file, which is a process that RaceRender can usually help with, using the following steps:

1) Select the data input in the Input Files list, and click "Join". They should now all appear under a new "Joined Data" input object
2) Make sure they're in the correct order (use "Move Up" / "Move Down" to arrange them, if needed)
3) Right-click on the "Joined Data" input object that you had just created, and select "Merge Joined Data into a Single File"

[xxchris82xx]

Thanks Weston,
I've found out the method few weeks ago.

Thanks a lot!