Is there a way to install the wideband so it reads in the scanner if we don't have the MPVI Pro?
Is there a way to install the wideband so it reads in the scanner if we don't have the MPVI Pro?
If you have GM car without can-bus you can wire it into the AC pressure circuit or the EGR circuit on the computer, then create a channel to log the wideband from that.
If you have a can-bus vehicle, AEM makes a wideband that interfaces with the can-bus system and can be logged that way. I assume it woulds on anything can-bus from GM, Ford or Dodge.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
Reply With Quote