car- 04 Pontiac Aztec fwd ... not supported by HPT
new engine 04 Buick Regal GS 3800 supercharged Supported
Buick engine running on the Buick ECM, vats disabled. Running in the Asstec.
Harness is cross between the 2 harness. it can still have issues also...
The issue is it's throwing an airbag light. code b1001 'option configuration error'
I can reset it with another scanner system but with restart , the BCM disables the air bags. 'Driver and passenger frontal loops - disabled'
It looks like a VIN problem. the Buick vin is in the ECM
Asstec vin in BCM and the bodybag system is looking for matching VINs
Id like to flash the Buick ECM with the Asstec Vin but since HPT doesn't support the Asstec at all. I don't think it would pass the 'checkism' requirement
Also don't know if it would affect the programing of the ECM by the vin not matching the Buick info.
or cost 6 credits and still not work even if the stars align.
I don't know if I can trick the bodybag system by feeding sensor data to the Asstec ECM & bury it some where.
maybe a sticker over the light in the cluster... joking....kinda...
When ya get done crying at laughing at me , any help would be cool