Hey fellas, I have been tuning GM with HP tuners for about 7-8 years and can knock out a pretty good FI or cam/heads tune pretty easy but this coyote stuff is a lot to learn in a short time. I just purchased a VMP stage 1 gen2 setup from VMP this week and their tuning is included but is about two weeks out. I will let them handle the tuning via the SCT xcal 4 but does anyone have a read I can use to move the car around in the mean time? setup is 60mm twin TB, 82mm pulley, 56lb injectors. not looking to scam someones tune and go race the car, just need to be able to move it from my shop to my house and to dyno if needed. thanks for any help guys. I'll probably end up diving in and tuning this this myself eventually as I mod the car deeper but that's a few hundred hours of learning I simply don't have time for right now. car is a 16 5.0 non-pp, 6 speed.