P1 Procharger on 16 LT1 SS Camaro It will not go over 86.69 Lbs per min on scan pid Tried a known good MAF same
Any one run into this see attach file Any help appreciated Has Kooks Long tubes and No Cats w P1 SC
P1 Procharger on 16 LT1 SS Camaro It will not go over 86.69 Lbs per min on scan pid Tried a known good MAF same
Any one run into this see attach file Any help appreciated Has Kooks Long tubes and No Cats w P1 SC
Post log file
That particular channel stops logging at 86.69lb/min from what I recall.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
here is the log file
Lambda or AFR error still works...
Can also log dynamic airflow
so with my autel scan tool I max out at 1.44 lbs per second same as 86.66 Lbs per min Is this the limit of the scan data pid in the VCM?? going crazy on this one
655 G/sec...
Sorry I don?t look at the other units of measurement
Reply With Quote