I have a ls1 po1 ecu it had a sd operating system does any one know how do I change it to a 2 bar I do not have the original file
I have a ls1 po1 ecu it had a sd operating system does any one know how do I change it to a 2 bar I do not have the original file
You can't. The original file is required to switch back to stock then to a different operating system.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
Thanks for that information I was hoping there was some way but oh well he can purchase another ecu
You can flash another stock tune into his pcm
Will it show upgrade-ble OS's again if the OS is currently already modded and the OS box is blank?
Either way it's 2 credits.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
Write entire with another stock file is pretty much the same as writing the original file back, aside from the vin being different.
It?s going to cost credits anyway, buying another ecu is a waste.
What car is it?
It’s a vortech blown lh torana ls1