Page 1 of 2 12 LastLast
Results 1 to 20 of 21

Thread: Autostick up shift in NAG1 / WA580

  1. #1
    Tuner
    Join Date
    Jun 2018
    Location
    Dubai
    Posts
    62

    Autostick up shift in NAG1 / WA580

    Ive tried everything to diable the autostick up shift for NAG1 / WA580 in jeep wrangler and no luck in doing that
    Anyone who tried it and been able to do it here ? HELP !

  2. #2
    Advanced Tuner coanan's Avatar
    Join Date
    Mar 2009
    Location
    S. Florida
    Posts
    582
    You've done this? Transmission - shift general - autostick: set to disable
    Last edited by coanan; 07-05-2018 at 05:19 PM.
    2018 Trackhawk PCM/TCM tune by Dusterhoff.
    Flex Fuel, MMX faux 95mm TB, GripTec 2.85, 10% ATI lower, FIC1200, ARH 1 7/8 w/cats, 180 T-stat

    13 Chrysler 300S, RAM BGE 412 stroker, cam motion 232/246 619/619 118 +4, ATI 18% OD pulley
    Whipple Gen5 3.0, 2.50 upper pulley, Smooth Boost controller, FIC 1200 inj. Nick W 108mm TB, FORE dual return fuel system, E85, FTI 2800 stall(SRT83380), SHR WAR Viking trans and valve body, Getrag 3.73, 1 7/8 kooks w/hi-flow cats, 3" Magnaflow Cat-back 943rwhp

  3. #3
    Tuner
    Join Date
    Jun 2018
    Location
    Dubai
    Posts
    62
    this is the stock file of the car i coudnt understand how to disable it

    help please
    Attached Files Attached Files

  4. #4
    Advanced Tuner coanan's Avatar
    Join Date
    Mar 2009
    Location
    S. Florida
    Posts
    582
    Quote Originally Posted by Alshuwaihi View Post
    this is the stock file of the car i coudnt understand how to disable it

    help please
    You have auto upshift and autostick WOT enabled
    I have the latest beta, so some things moved around
    Go to trans section
    Transmission - shift general - autostick: set them to disable one at a time and see if that is what you are looking to do.
    2018 Trackhawk PCM/TCM tune by Dusterhoff.
    Flex Fuel, MMX faux 95mm TB, GripTec 2.85, 10% ATI lower, FIC1200, ARH 1 7/8 w/cats, 180 T-stat

    13 Chrysler 300S, RAM BGE 412 stroker, cam motion 232/246 619/619 118 +4, ATI 18% OD pulley
    Whipple Gen5 3.0, 2.50 upper pulley, Smooth Boost controller, FIC 1200 inj. Nick W 108mm TB, FORE dual return fuel system, E85, FTI 2800 stall(SRT83380), SHR WAR Viking trans and valve body, Getrag 3.73, 1 7/8 kooks w/hi-flow cats, 3" Magnaflow Cat-back 943rwhp

  5. #5
    Tuner
    Join Date
    Jun 2018
    Location
    Dubai
    Posts
    62
    Quote Originally Posted by coanan View Post
    You have auto upshift and autostick WOT enabled
    I have the latest beta, so some things moved around
    Go to trans section
    Transmission - shift general - autostick: set them to disable one at a time and see if that is what you are looking to do.
    i also have beta but it seams what option you have is different from mine
    1.png
    2.png
    3.png
    4.png
    5.png
    6.png
    7.png
    8.png
    9.png
    10.png

  6. #6
    Tuner
    Join Date
    Jun 2018
    Location
    Dubai
    Posts
    62

  7. #7
    Advanced Tuner coanan's Avatar
    Join Date
    Mar 2009
    Location
    S. Florida
    Posts
    582
    Guess this tuning software is not all the same, I don't see the autostick option in yours. My trans section has a lot more options. Beta 4.1.159
    2018 Trackhawk PCM/TCM tune by Dusterhoff.
    Flex Fuel, MMX faux 95mm TB, GripTec 2.85, 10% ATI lower, FIC1200, ARH 1 7/8 w/cats, 180 T-stat

    13 Chrysler 300S, RAM BGE 412 stroker, cam motion 232/246 619/619 118 +4, ATI 18% OD pulley
    Whipple Gen5 3.0, 2.50 upper pulley, Smooth Boost controller, FIC 1200 inj. Nick W 108mm TB, FORE dual return fuel system, E85, FTI 2800 stall(SRT83380), SHR WAR Viking trans and valve body, Getrag 3.73, 1 7/8 kooks w/hi-flow cats, 3" Magnaflow Cat-back 943rwhp

  8. #8
    Tuner
    Join Date
    Jun 2018
    Location
    Dubai
    Posts
    62
    Anyone from HP tuner can solve this problem?

  9. #9
    Tuner
    Join Date
    Jun 2018
    Location
    Dubai
    Posts
    62
    Help please
    Jeep wrangler 2012 automatic, sprintex supercharger, 9lbs of boost, 4.5" lift, fox 2.5 internal bypass shocks, 4.88 gears, 37" tires,

    Ford Mustang Shelby gt350 2017, airraid air filter, jlt catch-can,

  10. #10
    Senior Tuner
    Join Date
    May 2015
    Posts
    1,907
    update your version of HP Tuners, and reread your vehicle, the switches will be there. Make sure your settings are to advanced, as well.

  11. #11
    Tuner
    Join Date
    Jun 2018
    Location
    Dubai
    Posts
    62
    Quote Originally Posted by 06300CSRT8 View Post
    update your version of HP Tuners, and reread your vehicle, the switches will be there. Make sure your settings are to advanced, as well.
    How to change the setting to advance?
    Jeep wrangler 2012 automatic, sprintex supercharger, 9lbs of boost, 4.5" lift, fox 2.5 internal bypass shocks, 4.88 gears, 37" tires,

    Ford Mustang Shelby gt350 2017, airraid air filter, jlt catch-can,

  12. #12
    Senior Tuner
    Join Date
    May 2015
    Posts
    1,907
    EDIT>VIEW>Advanced

    If its basic, after selecting advanced you will need to close out and reopen the tune to get the view to show advanced mode.

  13. #13
    Tuner
    Join Date
    Jun 2018
    Location
    Dubai
    Posts
    62
    Quote Originally Posted by 06300CSRT8 View Post
    EDIT>VIEW>Advanced

    If its basic, after selecting advanced you will need to close out and reopen the tune to get the view to show advanced mode.
    thank you
    i will try the new options today
    Jeep wrangler 2012 automatic, sprintex supercharger, 9lbs of boost, 4.5" lift, fox 2.5 internal bypass shocks, 4.88 gears, 37" tires,

    Ford Mustang Shelby gt350 2017, airraid air filter, jlt catch-can,

  14. #14
    Tuner
    Join Date
    Jun 2018
    Location
    Dubai
    Posts
    62
    I tried to disable the autostick wot and auto stick upshift and no use the car still upshiting on its own ��
    Jeep wrangler 2012 automatic, sprintex supercharger, 9lbs of boost, 4.5" lift, fox 2.5 internal bypass shocks, 4.88 gears, 37" tires,

    Ford Mustang Shelby gt350 2017, airraid air filter, jlt catch-can,

  15. #15
    i have been having the same problems and more the latest update to put it nicely is shit so hp but something is not correct

  16. #16
    Senior Tuner Russ K's Avatar
    Join Date
    Dec 2005
    Location
    Regina, Sask.
    Posts
    4,213
    I have tried every combination of Auto Stick disabled/enabled. And still will upshift automatically. The only way to prevent the auto upshifts, is to put the vehicle into sport mode if it has the button. And even then, it will upshift after hitting the rev limiter.

    Russ Kemp

  17. #17
    Senior Tuner
    Join Date
    May 2015
    Posts
    1,907
    Guys - you cannot override the TCM limit setting, no matter what you do with the other settings.

    The way a MTCM used to be setup, and most of the early 2006 EGS 52 TCMs, was the engine cutoff rpm limit was LOWER than the TCM limit, and the enable auto shift was set to disable. This would mean you hit your engine rpm limit and never shift, you can sit there all day sitting on your rev limit and itll never shift. SOMETIMES if you managed to really bang hard PAST your engine rpm limit you can just touch the TCM limit and it would shift.

    If you want to disable autoshift entirely, set your TCM limit rpm about 500rpms HIGHER than your engine rpm limit, and set the TCM limp offset to about 500rpms. This will leave you hitting your engine rpm limit every time with no shift when in Autostick.

  18. #18
    Tuner
    Join Date
    Jun 2018
    Location
    Dubai
    Posts
    62
    Quote Originally Posted by 06300CSRT8 View Post
    Guys - you cannot override the TCM limit setting, no matter what you do with the other settings.

    The way a MTCM used to be setup, and most of the early 2006 EGS 52 TCMs, was the engine cutoff rpm limit was LOWER than the TCM limit, and the enable auto shift was set to disable. This would mean you hit your engine rpm limit and never shift, you can sit there all day sitting on your rev limit and itll never shift. SOMETIMES if you managed to really bang hard PAST your engine rpm limit you can just touch the TCM limit and it would shift.

    If you want to disable autoshift entirely, set your TCM limit rpm about 500rpms HIGHER than your engine rpm limit, and set the TCM limp offset to about 500rpms. This will leave you hitting your engine rpm limit every time with no shift when in Autostick.
    i did that 1-2 the gear change on its own but for 2-3 the gear did not changed

    bu 7amood tune number 1.2.hpt
    Jeep wrangler 2012 automatic, sprintex supercharger, 9lbs of boost, 4.5" lift, fox 2.5 internal bypass shocks, 4.88 gears, 37" tires,

    Ford Mustang Shelby gt350 2017, airraid air filter, jlt catch-can,

  19. #19
    Quote Originally Posted by Alshuwaihi View Post
    i did that 1-2 the gear change on its own but for 2-3 the gear did not changed

    bu 7amood tune number 1.2.hpt
    Was this ever resolved ?

  20. #20
    Tuner in Training
    Join Date
    Oct 2020
    Posts
    25
    we must wait , I have send the solution at the tech ,or you can set the sitch at 16 absolute value the switch with winols