Quick question here. I am tuning my 05 GTO with the E40 ECU. I have the errors for P0101,102, and 103 set to MIL on first error and SES unchecked.
For the ECU to properly fail in to SD only mode does it need to set the P0101 code? Right now mine is only setting P0102 and P0103. I have the MAF fail freq high and low set to 0hz. I entered all 0s in the MAF table and have the MAF unplugged and its running great, so im assuming its running in SD mode I just want to confirm that it doesnt NEED to actually set P0101 code for SD mode.
Ive attached my tune and a log file from a run this morning. My wideband wasnt hooked up so dont worry about no WB readings.
18-06-15 07-33-20.hpl
modified tune 2005 gto - Begin SD.hpt