Guys,
I have a question about this parameter.
From the factory
800 rpm 1200 rpm 1600 rpm 2000 rpm 2400 rpm 2800 rpm 3200 rpm
22.9% 28.30% 39.00% 43.40% 53.00% 60% 100%
My question are :
- Does it change the torque at low rpm to put 100% sooner
- Was the point of GM limiting the lugging on the engine at low rpm ?
- If it changes the torque at low rpm do you think there is a risk for the motor (too low oil pressure for the torque)
I saw some people put 100% everywhere, wanted to see if it is fine before trying... Does it require to change torque management ?
Thanks