-
Tuner in Training
gen5 e92 ECU VATs Algorithm table
under System/General tabs, Vehicle-> VATS Algorithm (ECM 731) has 3 options
Opel
PPEI3
NAO
when disabling vats, whats the difference.
In the past swaps, I would disabe VATs 1 (only option available on the stock tune file) and disabled Starter Diag and still would not run, always flashed a 2014 tune that had vats 1 and 2.
I read on another post where someone recommended NAO vs stock Opel .... I cannot seem to find any info on what the difference is between them and why you choose one over the other.
Thanks
clint
Last edited by modularfox; 03-07-2022 at 08:19 PM.
Reason: cant spell :(