Results 1 to 5 of 5

Thread: I installed tune and can't even tell a difference

  1. #1
    Potential Tuner
    Join Date
    Jul 2018
    Posts
    1

    I installed tune and can't even tell a difference

    I have a 2002 Tahoe with duals, no cats, cold air. Basically stock. Runs like a turd. I bought the mvpi2 tuner. Changed t/m, and shift firmness and few other things to try and get some low end torque. I wrote to vehicle and drove it and I can't even tell a difference. I'm $500 in the red and no change

  2. #2
    Senior Tuner Ben Charles's Avatar
    Join Date
    Aug 2009
    Location
    Calibrating
    Posts
    3,373
    A lot more to tuning that what you did

    Email Tunes, [email protected]
    96 TA Blown/Stroked, 4L80E/Fab 9
    15 C7 A8 H/C 2.3 Blower/PI
    14 Gen 5 Viper
    Custom Mid Engine chassis, AKA GalBen C

  3. #3
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,565
    Yeah, pretty much what you did is going to do nothing.

    Like he said, there is tons of other things you can do but you just have to know what you are doing first.
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.

  4. #4
    Tuner camaroguy28's Avatar
    Join Date
    Jul 2014
    Location
    Salem Virginia
    Posts
    67
    just for fun, post the stock tune and the tune you made so we can see what all you did.

  5. #5
    Tuner in Training
    Join Date
    Jun 2018
    Posts
    26
    If you have no cats, you have to delete the rear o2's and related codes.