On the laptop > Connected to Vehicle > MPVI Pro data logging > Write Config > Press Record > Drive > Press Stop
It only shows a few things on the list and the chart.
On the laptop > Connected to Vehicle > MPVI Pro data logging > Write Config > Press Record > Drive > Press Stop
It only shows a few things on the list and the chart.
Try the newest beta.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
As I reported back to you on the other thread this morning, the BETA version does record the missing SAE PID'sOriginally Posted by Bill@HPTuners
However, you closed the thread before I could ask about your reply below...
Since the MPVI Pro no longer has a fully functional Standalone Datalogging feature, if using/running the latest software update...
Is using the BETA version "safe"?
I only use my HPTuners to tune and log my own personal vehicles.
2000 Trans AM WS6 6.0, 4L80e, 9"
2008 Silverado LT 5.3 liter Work Beater
Should be fine.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Thank you.
2000 Trans AM WS6 6.0, 4L80e, 9"
2008 Silverado LT 5.3 liter Work Beater
Bill, just to update...Ever since I downloaded the newest BETA, not only did my loggable channels come back, but I have not had one instance where I wasn't able to reflash at my previous faster speeds...and no lockups, as I had in this other post...
https://forum.hptuners.com/showthrea...new-log-on-etc
2000 Trans AM WS6 6.0, 4L80e, 9"
2008 Silverado LT 5.3 liter Work Beater
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
I downloaded the newest BETA, however this did not solve the issue of half my channels missing in the standalone datalogging. Issue looks the same as OP. What can I try to do to fix this?
Reply With Quote