Results 1 to 7 of 7

Thread: audi zf8hp shift rpm increase

  1. #1
    Potential Tuner
    Join Date
    Jul 2018
    Posts
    8

    audi zf8hp shift rpm increase

    Hello , new to the tuning world .just got my mpvi2 and read the tcu on my audi a6 .have to say that I have made changes to my tcu and all with great results and has changed my thoughts on selling the car .right now as I am I have the ecu rev limit set to 7200 rpms and now that I have the ability to mess around with the transmission I have the shift scheduling set to 1525rpm on 1st 2285 on 2nd 3415 on 3rd 4315 on 4th 5600 on 5th 7200 on 6th 8575 on 7th ( out put shaft rpm ).gear ration is 4.714,3.143,2.106,1.667,1.285,1.000,.839,.667.i have made this change to every map for shift scheduling on 99.6%-100% throttle position .WHAT AM I MISSING ????????

  2. #2
    Potential Tuner
    Join Date
    Jul 2018
    Posts
    8
    Hpt just updated the files capabilities and added tcu rev limiter , increased to 7300 rpm and still won’t shift pass stock

  3. #3
    Potential Tuner
    Join Date
    Jul 2018
    Posts
    8
    Update , car shifts pass the stock rev limit ,only in Manuel mode with auto upshift off .

  4. #4
    HPT Employee Engineer@HPT's Avatar
    Join Date
    Jan 2015
    Location
    fecadefa
    Posts
    615
    Can you please open a support ticket and include your tune and a scanner log?
    Also I would suggest posting these type of questions in the "Other Tuning" section.

  5. #5
    Potential Tuner
    Join Date
    Jul 2018
    Posts
    8
    Ok , will do and new to this forum , sorry for the miss placement of the post

  6. #6
    Potential Tuner
    Join Date
    Jul 2018
    Posts
    8
    Ticket submitted #137751

  7. #7
    HPT Employee Engineer@HPT's Avatar
    Join Date
    Jan 2015
    Location
    fecadefa
    Posts
    615
    Thanks. An engineer will be reviewing it tomorrow.