can someone please post a pic of it? Im looking at the help file and this is what im getting from it.
lc1 white pin 1
lc1 green pin 4
lc1 red 12v pwr source (running off the TCS)
lc1 blue going to reroute to the battery
where is the analog input at? Im going to run it as a WB only, not a NB/WB. Thats all I see on here is issues with setting it up that way, but not much on just the WB. Can someone please shed some light on this for me so I can get back to tuning
Nino