Results 1 to 2 of 2

Thread: Need Help

  1. #1
    Tuner in Training
    Join Date
    May 2018
    Posts
    22

    Need Help

    Sadly i'm having a emergency issue that i need help with.

    Been uploading tunes plenty of times and havent had any issues until now.

    Went to upload a tune to the truck a couple minutes ago and forgot to turn the key on. Selected "write vehicle" then realized i had not turned the key on, immediately turned the key on then thought it wasn't right and selected "abort".

    Now it will not start and when i go to "write" the new tune it says "controller unlocker: timed out" and fails to write the tune.

    Attempted to flash the stock tune back in and get stuck at the same issue.

    Is there a way to fix this of am i screwed and have to get it dealer reflashed?


    Any help would be appreciated
    03 3500 CCSB SRW 4X4 4:10's
    4.5" lift, 35's, AFE stg1 pro dry, BD SuperB Special, BD Manifold, Stock inj, Arson CP3 kit, Airdog 100, Mild trans build, DiPricol Gauges, Good Lookin Bolt-Ons

  2. #2
    Tuner in Training
    Join Date
    May 2018
    Posts
    22
    K, lesson learned dont get punchy.
    Disconnect and reconnect batteries did it