I bought my MPVI1 Pro in 2013 for the standalone datalogging, and honestly I've used it once and never again. The extra port for the external widebands was nice, but new cars have built-in widebands already.
I bought my MPVI1 Pro in 2013 for the standalone datalogging, and honestly I've used it once and never again. The extra port for the external widebands was nice, but new cars have built-in widebands already.
Agree totally mate, just thought it made sense to upgrade what I had rather than buy a second unit.
So I have the latest beta version and it read the stock file. Man, there's a LOT of things to tinker with! I made just a few small changes, mainly in the commanded tq values for 1st and 2nd gear. Also made the commanded coolant temp 180 instead of 212. Any tips or suggestions appreciated! I will be adding some bolt-ons soon. Carles downpipe and 3inch exhaust. What about the induction side?
Last edited by FieSTafury; 08-23-2018 at 11:04 PM.
Basically log anything that says "_____________ source." Those are the things limiting the engine. Then slowly raise each of those things in the tune.
2008 Pontiac G5 2.2L (main oil seal became a crunchy Autumn leaf, RIP)
2016 Fiesta 1.0L Ecoboost - Project "not-so-detestable"
OK, I'll have a look this weekend when I have more time.