Results 1 to 3 of 3

Thread: Case Learn

  1. 08-07-2006 #1
    Justin_Inc
    Justin_Inc is offline
    Tuner in Training
    Join Date
    Jul 2006
    Location
    Winnipeg,Manitoba,Canada
    Posts
    26

    Case Learn

    Car is a 01 Z24 (2.4L auto)

    have the idle set to 800rpm and removed the P/N rev limiters. when i go to do a case learn its giving me an error saying RPM's are too high. Should i worry about doing a case learn or just let it slide. how can i fix it? do i have to put the limiters to stock?
    2000 Chevy Cavalier (being completed)
    1987 Dodge D150 Turbocharged Slantsix EFI!
    Reply With Quote Reply With Quote
  2. 08-07-2006 #2
    Chris@HPTuners
    Chris@HPTuners is offline
    HP Tuners Owner Chris@HPTuners's Avatar
    Join Date
    Mar 2003
    Posts
    4,861
    Quote Originally Posted by Justin_Inc
    Car is a 01 Z24 (2.4L auto)

    have the idle set to 800rpm and removed the P/N rev limiters. when i go to do a case learn its giving me an error saying RPM's are too high. Should i worry about doing a case learn or just let it slide. how can i fix it? do i have to put the limiters to stock?
    sounds like you are not hitting the button before you rev the engine. Email your .hpt file or vcm suite info to support so i can double check the case learn is set correctly for your OS.

    Chris...
    I count sheep in hex...
    Reply With Quote Reply With Quote
  3. 08-07-2006 #3
    Justin_Inc
    Justin_Inc is offline
    Tuner in Training
    Join Date
    Jul 2006
    Location
    Winnipeg,Manitoba,Canada
    Posts
    26
    yup i hit the button and it says rev engine slowly untill fuel cut, so i do and then it gives me the error. anyways shot support an email.
    Last edited by Justin_Inc; 08-07-2006 at 11:48 PM.
    2000 Chevy Cavalier (being completed)
    1987 Dodge D150 Turbocharged Slantsix EFI!
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »