So I flashed a tune the other day and went into the scanner to clear the normal stuff in the transmission controller and accidentally chit the trans fast adapt reset button.
Now the transmission is shifting like crap, before I could get it to bark the tires on the 1>2 and the 2>3 and the 3>4 shifts. Now under WOT it "slips" or flares the shift for a bit before completing the shift.
I went thru the relearn process with the VCM scanner, in the short drives so far it doesn't seem to be improving much at all.
Is this something will return to normal with some drive time? I read after the fact that you don't normally clear this table unless it is a new transmission or torque converter.
I guess this is what I get for not paying attention while trying to multitask.