Results 1 to 5 of 5

Thread: Valve body strategy 6R80

  1. #1
    Advanced Tuner
    Join Date
    Jun 2008
    Location
    Tyler/Longview, TX area
    Posts
    651

    Valve body strategy 6R80

    Do we have the ability to change the valve body strategy in HPTuners?
    2014 Mustang GT
    Twin GTX3582R's
    Boss Manny
    Built, sleeved block
    Boss exh cams
    PAC springs
    SW 3" exhaust
    Return Fuel Sys
    ID1300
    FSFR0EA

  2. #2
    I dont think so, I have never seen anything that indicates we could. I am curious as well though.

  3. #3
    Advanced Tuner veeefour's Avatar
    Join Date
    Oct 2016
    Location
    Poland
    Posts
    682
    Strategies are ALL implemented in every calibration. You can select a proper calibration with Ford's IDS.

    No big difference between those strategies - virtually useless for a tuner.

  4. #4
    Does that mean the valve bodies can be changed out without updating solenoid ID with IDS? We put a late 14 F150 valvebody in my buddy's 2015 GT and we are wondering if it will have any issues. The car seems to be shifting fine but we loosened up the converter at the same time so we have a few things going on.

  5. #5
    Advanced Tuner veeefour's Avatar
    Join Date
    Oct 2016
    Location
    Poland
    Posts
    682
    Don't bother with strategies if you have HPT - changes are minimal like 1psi less pressure or bumped ramp rates.

    There might be significant changes between truck and car valve bodies tho - never tried this way.