I could use some help. New to HP Tuners. If I just wanted to adjust my idle would I only have to make changes to Engine/Idle/ Base Setpoint tab? Will I have to make changes anywhere else as well?
Thx
I could use some help. New to HP Tuners. If I just wanted to adjust my idle would I only have to make changes to Engine/Idle/ Base Setpoint tab? Will I have to make changes anywhere else as well?
Thx
Need to know what vehicle/PCM it is first before anybody can make a suggestion.
I always tune VVE....
2016 C7 M7 Z51
Callies ultra billet crank
Callies ultra billet rods
Diamond pistons
Jhonson high speed lifters
Ported and polished headwork
Custom cam
YSi-V7
2016 C7 Corvette
There are 4 or 5 tables that need changing. But if your idle is so high that you need to lower it by 500rpms and you're not asking for that high of an RPM, something else is wrong.
Indeed.
Are you stock and what is it idling at cold/hot?
I always tune VVE....
2016 C7 M7 Z51
Callies ultra billet crank
Callies ultra billet rods
Diamond pistons
Jhonson high speed lifters
Ported and polished headwork
Custom cam
YSi-V7