Originally Posted by
Camaro6
ECM program - systems, general, then change
- diag sys voltage low 12.5v
- diag system boost voltage 14.6v
- diag system boost max 10min (change this to minutes)
Fuel System - max desired pressure if you need more pressure I have 81.2 (0-222.2), 80.9, 79.3, 77.2, 74.3, 72.5 (277.8-444.5)
I assume all the parameters are already changed for the ZL1 low side pump? ECM & FSCM modules?
I just looked a 100% WOT log that I went from 1st-5th gear and pressure was 64 -67 steady and peaked at 81 when I paddle shifted the A8.
Hi Side was still at 2,932psi & 6,479rpm when I shifted into 5th gear.
14.8v system power
9psi boost with LT4 S/C on a LT1 2018 Camaro SS