Results 1 to 7 of 7

Thread: Connection trouble with 03 PT Cruiser Turbo Stage1 NGC3

  1. #1
    Advanced Tuner
    Join Date
    Feb 2006
    Location
    PAC NWest
    Posts
    395

    Connection trouble with 03 PT Cruiser Turbo Stage1 NGC3

    Is anyone familiar with these PCMs? When I try to connect with the MPVI it can see it but I keep getting a Controller Unlocker error. I'm in V3 something.

  2. #2
    Advanced Tuner
    Join Date
    Feb 2006
    Location
    PAC NWest
    Posts
    395
    Anyone?

  3. #3
    Advanced Tuner
    Join Date
    Aug 2016
    Location
    Thunderdome
    Posts
    389
    i dont think it's supported by hpt for editing.
    I have a burrito in my colon, yet refried beans come out...
    How i know it's from the same meal? I didn't ingest corn any other time.

  4. #4
    Advanced Tuner
    Join Date
    Feb 2006
    Location
    PAC NWest
    Posts
    395
    Its on the supported vehicle list.

    03-05 PT Cruiser GT 2.4*

    The asterisk refers to the NGC1, which is not supported. This is NOT an NGC1.
    Last edited by gottogo; 09-11-2018 at 08:56 PM.

  5. #5
    Advanced Tuner
    Join Date
    Apr 2014
    Posts
    704
    Quote Originally Posted by gottogo View Post
    Its on the supported vehicle list.

    03-05 PT Cruiser GT 2.4*

    The asterisk refers to the NGC1, which is not supported. This is NOT an NGC1.
    Are you able to see what the OS ID is on the PCM, by chance?

    You should also try updating the VCM Editor to the most recent version (v4.0.12 currently).
    Last edited by B00STJUNKY; 09-11-2018 at 09:21 PM.

  6. #6
    Advanced Tuner
    Join Date
    Feb 2006
    Location
    PAC NWest
    Posts
    395
    I doubt it would be on the label, right?

    But it might be on the connection screen. It does ID the PCM, it just fails to unlock. I'll try to check it again tomorrow.

  7. #7
    Advanced Tuner
    Join Date
    Feb 2006
    Location
    PAC NWest
    Posts
    395
    Support has been working with me on it. But I haven't heard from them in a few days so I thought I would see if anyone here had any ideas.

    It is supported, and I did upgrade to V4 (per support), but still no connection. Any ideas?