Results 1 to 5 of 5

Thread: updating injectors on E38 Camaro

  1. #1
    Advanced Tuner
    Join Date
    Jun 2018
    Posts
    603

    updating injectors on E38 Camaro

    So I'm trying to add some new injectors from FIC (clinic) on a Camaro SS. They provided data but the Flow rate vs pressure delta numbers don't match up. The ecm lists psi but the FIC charts list KPA. How do we correct for this. I can change the flow rate to lb/h like the FIC chart but it won't let me change the units on the pressure side.

  2. #2
    Senior Tuner mowton's Avatar
    Join Date
    Mar 2007
    Location
    Florida
    Posts
    3,773
    Right Click on the Pressure Delta flow rate cells, select Column Axis, select Units, change to kPa

    Ed M
    2004 Vette Coupe, LS2, MN6, Vararam, ARH/CATs, Ti's, 4:10, Trickflow 215, 30# SVO, Vette Doctors Cam, Fast 90/90, DD McLeod, DTE Brace, Hurst shifter, Bilsteins etc. 480/430

    ERM Performance Tuning -- Interactive Learning ..from tuning software training to custom tunes
    HP Tuners Dealer- VCM Suite (free 2hr training session with purchase), credits and new Version 2.0 turtorial available
    http://www.ermperformancetuning.com
    http://www.facebook.com/ERMPerformanceTuning

    [email protected]

  3. #3
    Advanced Tuner
    Join Date
    Jun 2018
    Posts
    603
    Thanks for the quick answer. I knew it was an easy fix like that.

  4. #4
    Advanced Tuner
    Join Date
    Jun 2018
    Posts
    603
    Also, does anything need to be changed in the fuel system section? I found a duplicate flow rate vs pressure table over there.

  5. #5
    Senior Tuner mowton's Avatar
    Join Date
    Mar 2007
    Location
    Florida
    Posts
    3,773
    That is for the Fuel Pressure Control Module (FPCM) and my understanding is it doesn't need to be changed.

    Ed M
    2004 Vette Coupe, LS2, MN6, Vararam, ARH/CATs, Ti's, 4:10, Trickflow 215, 30# SVO, Vette Doctors Cam, Fast 90/90, DD McLeod, DTE Brace, Hurst shifter, Bilsteins etc. 480/430

    ERM Performance Tuning -- Interactive Learning ..from tuning software training to custom tunes
    HP Tuners Dealer- VCM Suite (free 2hr training session with purchase), credits and new Version 2.0 turtorial available
    http://www.ermperformancetuning.com
    http://www.facebook.com/ERMPerformanceTuning

    [email protected]