-
Tuner in Training
MPVI2+ Data Logging - Requires Resync but "Resync failed.NameResolutionFailure"
I have an MPVI2+Pro. Latest Scanner Software. Latest Firmware in MPVI2+. Connected via USB to PC, Plugged into OBD2 port and Ignition on. When trying to setup Data Logging, I get Resync Resources required but response is "Resync failed.NameResolutionFailure". I am too far to get an internet connection if that is what is required. I really need the standalone data logging.
-
Tuner in Training
I answered my own question. You do need an internet connection to execute this function. So I ran a 200' CAT5 Ethernet connection to my laptop in the car.
-
Tuner in Training
You also need to be connected to the vehicle's OBD2 port and Ignition On and Vehicle Connected, otherwise the Data Logging function cannot find the MPVI2+ Interface! That makes no sense at all. I should be able to set up the data logging in my office, not require connecting to the vehicle.