Originally Posted by
Thatwhite5.0
I don't have your file opened in front of me. This will sound different. Going off your file from what I remember the other day when I looked at your file, this is how your ghost can should be.
Your Fuel Econony Distance table. You have two of them in your VCT tab. The one I'm talking about has load on the left side of the table and and rpm on the top. You need to have a 1.0 on on the left side of your table where you had 0.0. Going across the top of the table. Starting from the left, 1.0, 1.0, 3.0, 3.0. 3.0, 3.0, 3.5, 3.5, 0, 0. I think I remember that, the 0's need to be the last two on the right.
Next, in your optimal stability and your emission reduction MAPPED POINT tables. Both of these tables are small with one column. Left side has, 0, 1, 2, 3, 4. Change all of the cell values to 1.0 in those 2 tables.
Changing those should get your ghost cam sounding and idling better. Those are temporary until I get to my laptop because I seen you posting a few times.
It's going to be hard getting good fuel economy with the idle consuming a lot more fuel. The optimum power spark table I posted for you in the other thread will get you the timing you want for your fuel.