-
Tuner in Training
different readings
sorry this might be a repost but im new to this site and got a question. last night i hooked up my wideband. i have one of those LC1s. i grounded the EIO, Green and White to the one dash bar, and the blue wire for the heater to the dash bar about 3" from the other ground. well my gauge reads 11.8-12.2 at WOT and the laptop is reading 13.8-14.5 wondering what is right and how do i go about fixing it so i can start tuning
-
Advanced Tuner
-
Tuner in Training
im using the HP scanner and when i had the PID set as LM1 it read 2 points off now if i set the PID to LC1 it reads way off