PE fueling not coming in

[Blkdoutbird]

I have checked all the parameters for PE to enable and even added the PE switch to a file after this pull to verify that PE conditions were being met to enable and it switched to ON when I went to WOT. Please take a look and see if there is something I may have overlooked, I can't find anything that would account for the extra fuel to not be coming on....PE_conditionsmet_stillstoich.hptPEnotcomingin.hpl

[07GTS]

PE TPS is not actual TPS u should be able to divide what u have by 4 then see if its how u like it, usually PE TPS of 10 is around 30% actual TPS, once u see where is triggers u can adjust to suit

[Blkdoutbird]

I have it set so it takes progressively less input with more rpm. The problem I am having is even when I go WOT, through the scanner the switch for PE switches to ON but there is still no extra fueling being added to reach my commanded PE....

[HackAbuse]

PE is working perfectly fine. It's just underestimating airflow by about 15-20%.

You need to tune VE and/or MAF