Results 1 to 3 of 3

Thread: diff swab from c to srt8

  1. #1
    Tuner in Training
    Join Date
    Apr 2018

    diff swab from c to srt8

    hi guys ..

    am swabbing my 07 300c differential to the srt8 one .
    i did collect the parts and every thing ,
    but couldnt find the table of changing the ratio of it in the HP editor .
    can some one locate it ? or i can use the one from diablo trinity on this?

    thanks >

  2. #2
    Tuner coanan's Avatar
    Join Date
    Mar 2009
    S. Florida
    It's in the scanner
    2013 Chrysler 300S, 6.4 BGE with 6.4 SRT cam, AIT 18% OD pulley, E-force with 2.75 pulley, fastman 84+4 mm throttle body, 1 7/8 kooks long tubes w/hi-flow cats, Magnaflow Cat-back, FTI 2800 stall, Trans built by Hellraiser, Dings Racing valve body and tune, Getrag 3.73, Walbro 400LPH, DW 65# inj. LG aluminum rad. Dual SRT fans. 4 piston Brembo upgrade. Mopar Stage one springs.

  3. #3
    you will need a small spacer between the top of the diff and the sub from
    the c sub frame is about 5mm smaller and the srt8 pumpkin hits on the top