Results 1 to 3 of 3

Thread: diff swab from c to srt8

  1. #1

    diff swab from c to srt8

    hi guys ..

    am swabbing my 07 300c differential to the srt8 one .
    i did collect the parts and every thing ,
    but couldnt find the table of changing the ratio of it in the HP editor .
    can some one locate it ? or i can use the one from diablo trinity on this?

    thanks >

  2. #2
    Advanced Tuner coanan's Avatar
    Join Date
    Mar 2009
    Location
    S. Florida
    Posts
    582
    It's in the scanner
    2018 Trackhawk PCM/TCM tune by Dusterhoff.
    Flex Fuel, MMX faux 95mm TB, GripTec 2.85, 10% ATI lower, FIC1200, ARH 1 7/8 w/cats, 180 T-stat

    13 Chrysler 300S, RAM BGE 412 stroker, cam motion 232/246 619/619 118 +4, ATI 18% OD pulley
    Whipple Gen5 3.0, 2.50 upper pulley, Smooth Boost controller, FIC 1200 inj. Nick W 108mm TB, FORE dual return fuel system, E85, FTI 2800 stall(SRT83380), SHR WAR Viking trans and valve body, Getrag 3.73, 1 7/8 kooks w/hi-flow cats, 3" Magnaflow Cat-back 943rwhp

  3. #3
    you will need a small spacer between the top of the diff and the sub from
    the c sub frame is about 5mm smaller and the srt8 pumpkin hits on the top