Results 1 to 7 of 7

Thread: new to mpvi2 no application key emailed

  1. #1
    Tuner in Training
    Join Date
    Oct 2018
    Posts
    17

    new to mpvi2 no application key emailed

    HI
    Under the help column in application key. I enter the number that I think is the application key. same as interface id I assume. and it just puts a x next to it. and im pretty sure im in demo mode.
    its read my vehicle and ive changed my speedo calibrations but under fuel it only shows flow rate vs kpa icon.
    I dont think my system is linked up.
    Ive done research and cant figure it out.
    please help.
    my old boss is a tuner and hes gonna remote tune through my laptop on team viewer in a couple hours. lol

  2. #2
    Tuner in Training
    Join Date
    Oct 2018
    Posts
    17
    I just bought this through hpt. Came today. With 2 credits prepurchased.

  3. #3
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    8,017
    Edit > view > advanced.

    That should fix the not being able to see all tables.
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

  4. #4
    Tuner in Training
    Join Date
    Oct 2018
    Posts
    17
    genuis lol
    thanks
    just rescaled my injectors

  5. #5
    For the MPVI2 there is no application key, you go to "Help -> Resync Interface" to sync your purchased licenses online. Please also make sure you download and install the latest 4.0 or 4.1 software from our website.

    https://www.hptuners.com/downloads/
    I count sheep in hex...

  6. #6
    Potential Tuner
    Join Date
    May 2019
    Posts
    4
    After resync I should be good to go and no demo mode?

    My question was going to be: Where do I find the Application Key on the Customer Login screen to enter in to VCM Suite/Editor?

    I do not see this information under the Customer Login page.

    I can not do anything as my software is in Demo Mode only currently.

  7. #7
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    26,123
    Quote Originally Posted by QABDJ View Post
    After resync I should be good to go and no demo mode?

    My question was going to be: Where do I find the Application Key on the Customer Login screen to enter in to VCM Suite/Editor?

    I do not see this information under the Customer Login page.

    I can not do anything as my software is in Demo Mode only currently.
    For the MPVI2 there is no application key, you go to "Help -> Resync Interface" to sync your purchased licenses online. Please also make sure you download and install the latest 4.4 or 4.5 software from our website.

    https://www.hptuners.com/downloads/
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"