inside menu of FANS desired coolant temp question..

[teamjin]

hello.
cruze 1.6T
Column axis 90 seems operation fan by coolant temp.
what does column axis 105 do?
i tried 0-100% nothing change on fan logic..
fans.jpg

[lukearmstrong1990]

there is a table of desired ECT.

its on the axis of RPM zone vs. torque zone.

the set points for each RPM and torque zone is delivered.

the desired ECT table is populated with values that will match the table you have a picture of. it your 105 desired colum does nothing its likely because it never enters that desired ECT calibrated from the desired ECT table itself

[teamjin]

there is a table of desired ECT.

its on the axis of RPM zone vs. torque zone.

the set points for each RPM and torque zone is delivered.

the desired ECT table is populated with values that will match the table you have a picture of. it your 105 desired colum does nothing its likely because it never enters that desired ECT calibrated from the desired ECT table itself