Results 1 to 4 of 4

Thread: Converting sct file to hp tuners file

  1. #1
    Potential Tuner
    Join Date
    Oct 2018
    Posts
    1

    Converting sct file to hp tuners file

    Good day Guys,
    We have an SCT custom tune file for a Jeep Wrangler JK 3.6 V6 pentastar, with a supercharger kit. The tune was designed using sct format, but we tried 3 sct devices to upload the tunes with no success. The devices don't want to communicate with the ECM. Now we have successfully read the stock ECM file using hp tuners, my question is can one convert the actual sct file format over to hp tuners in order for us to upload the custom tune file without needing to do a full new custom tune file on hp tuners???

    Appreciate if someone could help. Thanks

  2. #2
    Advanced Tuner
    Join Date
    Dec 2011
    Location
    San Antonio, TX
    Posts
    319
    Don't believe there is a way to do this, sorry.
    JTC Performance - Authorized HP Tuners Reseller
    Remote performance tuning

  3. #3
    Advanced Tuner uarperformance's Avatar
    Join Date
    Apr 2007
    Location
    Largo
    Posts
    255
    what year is it. No you can't convert those files. Must write tune

  4. #4
    Advanced Tuner Montecarlodrag's Avatar
    Join Date
    Nov 2009
    Location
    Pegasus Galaxy
    Posts
    919
    SCT custom tunes can't be converted to an actual tune file. They are .CEF files that the X3/X4 device can use to tune the vehicle, however those files are encrypted and can't be converted back even with SCT software, you need the original .MTF file used to export the .CEF

    Which SCT device are you using? The files are locked to the serial number of the handheld, you can't use a different one to load them.
    9 sec Montecarlo SS