Results 1 to 2 of 2

Thread: fan and ic pump controls

  1. #1
    Potential Tuner
    Join Date
    Aug 2011
    Posts
    2

    fan and ic pump controls

    for a 2016 ATS-V automatic trans. do we have control of the cooling fans and ic pump so that when we shut off the car they will turn on for x amount of time. or say turn on when ignition is on with engine off? i see in scanner where we can manually turn on and of the ic pump but the fans dont seem to turn on and off with the fan controls in scanner. now in editor there are controls to adjust fans to turn on when ignition off via a set temp. do these work.
    (sold)97 regal gs,L32 swap,vs cam,zzp fullsize ic,2.9,42.5lb,lq4 maf,zzp shift kit,zzp polly mounts,4" intake,SD headers,fp rewire,stage1vb,alt rewire,wrapped crossover pipe,160tstat,AL103's,3"exh,hp tuned.286whp 329tq(mustang dyno)
    (sold)2012 Sonic 1.4 turbo 6mt: (sold) 2005 cts-v fbo, tune:
    2016 ATS-V A8, tapout tuned.

  2. #2
    Potential Tuner
    Join Date
    Nov 2011
    Location
    Northern Illinois
    Posts
    7
    Not sure about the ic pump but for the fans you could try lowering the temperature and run time at which they stay running when the key is turned off. If there is no PCM control for the pump you could wire in a relay circuit to activate the pump while the fans are running.