First post on here, ever. I don't expect to impress.
I'm completely green in using hp tuners and last week I finally did the cam swap in my 02 Silverado rcsb 4.8.
I have the new MPVI2 standard device.
SS2 Jegs Cam is 228/230 .585 lift 112. New everything in top end, head gaskets, lifters, etc.. Circle d 3k stall. long tubes no cats. stock air box with airaid tube. new fast firewires. tr55ix plugs. catch can system
I keep getting a p0106 map code and idle acts up every now and then. I have gone over everything and have no vacuum leaks. Now since im new to hp tuners I looked through several tunes from the repository and went from there,. It gets me to work fine. Ive been researching when I can making subtle changes but still learning what everything means. I have attached my current tune file to this and will take any kind of help/criticism I can get. Will take criticism about everything else in tune also not just the idle/map.
Not very smart but I also logged a WOT 1/4 pass on it and attached that as well just for more information for you all.
I have some decapped injectors for it that I know I need to install cause I noticed duty cycle was maxed out on that run. Also noticed that at WOT, throttle % said like 96-97%.